Allied Telesis AT-S63 - Manual (Page 209)

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Operations 209
Displaying the DoS Settings
To display the DoS settings, perform the following procedure:
1. From the Home page, select Monitoring.
2. From the Monitoring menu, select Network Security.
3. Select the DoS tab.
The DoS tab is shown in Figure 74.
Figure 74. DoS Tab (Monitoring)
4. Click the port whose DoS settings are to be displayed. You can select
more than one port at a time.
5. Using the DoS Type list, select the type of Denial of Service defense
whose settings are to be displayed.
6. Click View.