Allied Telesis AT-S63 - Manual (Page 407)

AT-S63 Management Software Web Browser Interface User’s Guide
Section VII: Management Security 407
Note
The Enable Server-based Authentication check box only applies to
new TACACS+ or RADIUS manager accounts. If you are only using
RADIUS for 802.1x port-based access control and not manager
accounts, leave the check box empty. The switch can still access the
RADIUS configuration information for 802.1x port-based access
control.
5. Click Apply.
6. To permanently save your changes, select the Save Config option in
the Configuration menu.
To configure TACACS+, go to “Configuring the TACACS+ Client
Settings” on page 408. To configure RADIUS, go to “Configuring the
RADIUS Client Settings” on page 412.