Allied Telesis AT-S63 - Manual (Page 109)

AT-S63 Management Software Web Browser Interface User’s Guide
Section I: Basic Operations 109
The Modify Trunk page is shown in Figure 28.
Figure 28. Modify Trunk Page
5. To change the name of the trunk, click the Trunk Name field and enter
the new name. The name can be up to 16 alphanumeric characters.
No spaces or special characters, such as asterisks and exclamation
points, are allowed. Each trunk must have a unique name.
6. To add or remove ports from a trunk, click the ports in the graphical
image of the switch. A selected port changes to white. An unselected
port is black. A static port trunk can contain up to eight ports.
7. Click Apply. Changes to a port trunk are activated on the switch.
8. To permanently save your changes, select the Save Config option in
the Configuration menu.
9. Reconnect the cables to the ports of the trunk.