Allied Telesis AT-S63 - Manual (Page 410)

Chapter 27: TACACS+ and RADIUS Protocols
410 Section VII: Management Security
Displaying the TACACS+ Client Settings
To display the TACACS+ client settings on the switch, perform the
following procedure:
1. From the Home page, select Monitoring.
2. Select the Mgmt. Protocols option.
The Mgmt. Protocols tab is displayed with the Server-based
Authentication tab selected by default, as shown in Figure 164.
Figure 164. Server-Based Authentication Tab (Monitoring)
The upper part of the page shows whether server-based
authentication is enabled or disabled and the authentication method.
The lower part of the page is used to view the settings of an
authentication client.
3. In the lower portion of the tab, click TACACS+ Settings.
4. Click View.