Allied Telesis AT-S63 - Manual (Page 33)

AT-S63 Management Software Web Browser Interface User’s Guide
Section I: Basic Operations 33
Starting a Web Browser Management Session
To start a web browser management session on an isolated switch (i.e.,
not part of an enhanced stack) or on a master switch of an enhanced
stack, perform the following procedure:
1. Start your web browser.
Note
If your PC with the web browser is connected directly to the switch to
be managed or is on the same side of a firewall as the switch, you
must configure your browser’s network options not to use proxies.
Consult your web browser’s documentation on how to configure the
switch’s web browser to not use proxies.
2. In the URL field of the browser, enter the IP address of the local
interface on the isolated switch or the master switch of an enhanced
stack. (If the switch is configured for SSH management, the prefix
“HTTPS://” is required.)
Figure 1. Entering a Switch’s IP Address in the URL Field
The AT-S63 management software displays the login page, shown in
Figure 2.
Figure 2. AT-S63 Login Page
Switch’s IP Address