Allied Telesis AT-S63 - Manual (Page 277)

AT-S63 Management Software Web Browser Interface User’s Guide
Section III: SNMPv3 277
Note
Do not use a value configured with the User Name parameter in the
SNMPv3 User Table.
7. In the Transport Tag field, enter a name of up to 32 alphanumeric
characters.
The Transport Tag parameter links an SNMPv3 Community Table entry
with an SNMPv3 Target Address Table entry. Add the value you
configure for the Transport Tag parameter to the Tag List parameter in
the Target Address Table as desired. See “Creating a Target Address
Table Entry” on page 258.
8. In the Storage Type field, select one of the following storage types for
this table entry:
Volatile
Select this storage type if you do not want the ability to save an entry in
the SNMPv3 Community Table. After making changes to an SNMPv3
Community Table entry with a Volatile storage type, the Save Config
option is not displayed on the Configuration menu.
NonVolatile
Select this storage type if you want the ability to save an entry in the
SNMPv3 Community Table. After making changes to an SNMPv3
Community Table entry with a NonVolatile storage type, the Save
Config option is displayed on the Configuration menu. Allied Telesyn
recommends this storage type.
Note
The Row Status parameter is a read-only field in the web browser
interface. The Active value indicates the SNMPv3 Community Table
entry takes effect immediately.
9. Click Apply to update the SNMPv3 Community Table.
10. To permanently save your changes, select the Save Config option in
the Configuration menu.