Agilent Technologies E3632A - Manual (Page 7)

6
The Rear Panel at a Glance
Use the front-panel key to:
• Select the GPIB or RS-232 interface (see chapter 3).
• Set the GPIB bus address (see chapter 3).
• Set the RS-232 baud rate and parity (see chapter 3).
1 Power-line voltage setting
2 Power-line fuse-holder assembly
3 AC inlet 4 Power-line module
5 GPIB (IEEE-488) interface connector
6 RS-232 interface connector
I/O Config