Agilent Technologies E3632A - Manual (Page 76)

Chapter 4 Remote Interface Reference
SCPI Command Summary
73
4
SCPI Command Summary
This section summarizes the SCPI ( Standard Commands for Programmable
Instruments ) commands available to program the power supply over the
remote interface. Refer to the later sections in this chapter for more complete
details on each command.
Throughout this manual, the following conventions are used for SCPI
command syntax.
• Square brackets ([ ]) indicate optional keywords or parameters.
• Braces ({ }) enclose parameters within a command string.
• Triangle brackets (< >) indicate that you must substitute a value or a code
for the enclosed parameter.
• A vertical bar ( | ) separates one of two or more alternative parameters.
First-time SCPI users, see page 111.
SCPI