TAG Heuer LINK - Manual (Page 79)

79
English
1. Press , then press , and then touch Settings.
2. Touch Wireless & networks, then select the Wifi check box to turn on Wifi in the Wifi Settings.
When on, the Wifi icon appears in the status bar.
3. Several access points will be showed and displayed in the list under the section of Wifi network.
4. Select the one you would connect and enter the password if required.
5. Touch “ Connect ” to connect the wireless access point.
To add another Wifi network
1. Press
, then press , and then touch Settings.
2. Touch Wireless & networks, turn on Wifi ( WLAN ) by checking the Wifi ( WLAN ) check box
3. Enter the network SSID and select the security.
Note : Your phone provides four ways of network certifi cate.
Open : no security.
WEP : Wired Equivalent Privacy. It a security protocol for wireless
networks that encrypts transmitted data. The WEP concept of pass
phrase is introduced so that you do not have to enter complicated
strings for keys by hand. It required to enter the access key but easy
to crack.
WPA / WPA2 PSK : Wi-Fi Protected Access. It is a protocol to secure
your wireless network so only you can use it. It is a wireless secu-
rity with greater protection than WEP. WPA or WPA2 must start to
replace the WEP to be useful. In order to preserve the integrity of the
pass phrase needed to be set by the user which to have to provide
longer than six to eight characters of the password.
802.1x EAP : 802.1x Extensible Authentication Protocol. The purpose
of 802.1x is to accept or reject users who want full access to a
network using 802.1x. It is a security protocol that works with 802.11