Ericsson LBI-39224 - Manual (Page 116)

LBI-39224
3-86
VMIM Audio Board Channel Configuration
All channel parameters are configured from the
Site Channel Configuration dialog box. Only those VMIMs which
were selected in the Site Channel Configuration List dialog box are
available for channel configuration. The selected VMIMs are displayed
in a list box at the top center of the dialog box.
Help
Choose the Help button to access the Help function. (Help is also
available by pressing the F1 key.)
View Current CEC/IMC Manager Channel Configuration
The upper list box in the
Site Channel Configuration dialog box,
labeled "CEC/IMC Manager," displays the current channel
configurations stored on the CEC/IMC Manager hard disk for the
currently selected VMIM. As the edit fields above this list box are
modified for a selected channel, the changes will appear also in this list
box for the selected channel.
View Current CEC/IMC Channel Configuration
The lower list box in the
Site Channel Configuration dialog box,
labeled "CEC/IMC," displays the current channel configurations stored
at the CEC/IMC for the currently selected VMIM interface module.
Information within this box updates only after
Send is performed from
the preceding Site Channel Configuration List dialog box.