Ericsson LBI-39224 - Manual (Page 235)

LBI-39224
3-205
Repeat the sequence for all necessary sites. A more detailed description
of the fields and configuration process follows.
The CEC/IMC ID ("switch assignment number") must be
set at the MOM Controller Board before ProSound will
operate correctly. The CEC/IMC firmware automatically
displays a CEC/IMC ID number even if one is not set at the
MOM, so a displayed CEC/IMC ID does not guarantee that
the switch assignment number has been set. Ensure this switch
assignment number has been set by the DIP switches on the
MOM Controller Board as specified in the ProSound section
of LBI-38938, CEC/IMC Digital Audio Switch Installation,
Set Up, and Troubleshooting.
Site ID (read/write)
Site ID number. Range = 1 – 32. Enter the site ID number for the site
to be configured for ProSound operation in this field and then press
Enter. When pressing Enter all other fields on the screen will update
in accordance with the current ProSound database configuration saved
on the CEC/IMC Manager's hard disk drive. This number matches the
MIM site assignment number set by the DIP switches on the MIM
Controller Board.
Site Alias (read only)
Alias of currently selected site. This name is defined at the System
Manager.
Priority System (read/write)
Priority site ID number for the currently selected site. Range = 1 – 32.
If a "0" is displayed, the priority system has not been defined. Enter the
priority system's site ID number in this field.
Local CEC/IMC ID (read only)
The CEC/IMC switch assignment number for the currently selected site
is displayed in the field. Range = 33 - 64.
Last Read From (read only)
This field indicates the source of the last update of the ProSound
configuration, whether from the CEC/IMC Manager hard disk or the
CEC/IMC.
NOTE!!