Ericsson LBI-39224 User Manual
Page 200
LBI-39224
3-170
Close
Choose the
Close
button to exit the
Tone Controlled Station State Table Mapping
dialog box and return
to the
Conventional Channel Configuration
dialog box. If any
changes have been made and not saved, you will be prompted
(
Write Changes to Disk?
) to save exit (
Yes
), exit without saving
(
No
), or cancel
Close
command (
Cancel
) and remain in the
Tone Controlled Station State Table Mapping
dialog box.
DC Controlled Station
If "DC" was selected for Control Signaling in the
Conventional Channel Configuration
dialog box, choosing the
State Table
button will display the
DC Controlled Station
State Table Mapping
dialog box, Figure 37. If any changes have
been made and not saved, you will be prompted
(
Write Changes to Disk?
) to save and display the
DC Controlled Station State Table Mapping
dialog box (
Yes
),
display the
DC Controlled Station State Table Mapping
dialog box
without saving (
No
), or cancel the
State Table
command (
Cancel
)
and remain in the
Conventional Channel Configuration
dialog box.