Ericsson LBI-39224 User Manual
Page 151
LBI-39224
3-121
procedure must be performed before the console will operate with the
new configuration.
Close
Choose the
Close
button to exit the
Console User Profile Configuration
dialog box and return to the
CEC/IMC Manager main window. If any changes have been made and
not saved, you will be prompted (
Write Changes to Disk?
) to save
and exit (
Yes
), exit without saving (
No
), or cancel the
Close
command and remain in the dialog box (
Cancel
).
3.11.3 C3 Maestro Console Hardware Configuration
Some console parameters are not shift dependent, for the C3 Maestro
Console these parameters are configured from the
C3 Maestro Hardware Configuration
dialog box, Figure 28. From
the CEC/IMC Manager menu bar select
Configure System
/
Console Configuration
/
Hardware
to display the
C3 Maestro Hardware Configuration
dialog box.
Figure 28 C3 Maestro Hardware Configuration Dialog Box
Help
Choose the
Help
button to access the Help function. (Help is also
available by pressing the F1 key.)
Select the console to configure from the list box in the top center of the
dialog box. The unit ID (LID) for the selected console will be
displayed in the text box in the upper left corner and the console type