Ericsson LBI-39224 - Manual (Page 136)

LBI-39224
3-106
Figure 25 Console Channel Configuration List Dialog Box
Each Console Channel Configuration List dialog box displays the
configurable consoles and configured/active consoles. An active
console represents an operating link between a dispatch console and the
CIM Controller Board.
Help
Choose the Help button to access the Help function. (Help is also
available by pressing the F1 key.)
Configurable Consoles:
The Configurable Consoles list box displays all inactive unconfigured
console interface modules. If a console appears in this box, no channel
configuration exists at the CEC/IMC Manager and no active Controller
Board control data link exists at the CEC/IMC for the corresponding
console assignment number. Any number of these available consoles
may be selected at one time to be added to the Configured/Active list
box for configuration.
Configured/Active Consoles:
The Configured/Active Consoles list box displays consoles which have
been added but not yet channel-configured, consoles which have had
previous channel configurations performed, and consoles which have
been previously channel-configured and have an active Controller
Board control data link. Before a console interface module can be
channel-configured, it must be listed in the Configured/Active Consoles
list box. Any number of the available consoles in this list may be
selected at one time for modification in the
Console Channel Configuration dialog box. All of the selected