Ericsson LBI-39224 - Manual (Page 184)

LBI-39224
3-154
– A console-originated conventional channel call is routed only
to the conventional channel. This is because the consoles
know nothing about the Causeway patch stored in the CCI and
VMIM. The Logical ID (LID) assigned to the conventional
channel handles this call.
Causeway Simulselect Operation
Causeway simulselect operation is summarized as follows:
– A conventional site-originated call on a Causeway-
simulselected conventional channel is routed to consoles but
not the respective Causeway-simulselected group. Radios
monitoring on the conventional channel also hear the call.
This operation is identical to "soft"-simulselected conventional
channels.
– A trunked site-originated group call is not routed to the
respective Causeway-simulselected conventional channel. It is
only routed to the other trunked radios and consoles
monitoring the group.
– A console-originated group call via a "common" PTT
(selected TX key, mic PTT, or footswitch) at the console is
routed to trunked sites and the Causeway-simulselected
conventional channel via the respective trunked group ID
(GID).
– A console-originated group call via an "instant" PTT (instant
TX key) at the console is routed to trunked sites only, not to
the simulselected conventional channel.
– A console-originated conventional channel call is routed only
to the conventional channel. This is because the consoles
know nothing about the Causeway simulselect stored in the
CCI and VMIM. The logical ID (LID) assigned to the
conventional channel handles this call.