Ericsson LBI-39224 - Manual (Page 31)

LBI-39224
3-1
3. CHAPTER 3
OPERATION AND CONFIGURATION
The primary intent of this chapter is to describe CEC/IMC Manager
program operation, and valid CEC/IMC Manager and CEC/IMC Digital
Audio Switch configuration settings. In some cases detailed system-
level information is presented where necessary. This chapter is
arranged in the order recommended for the set-up of a new CEC/IMC
Digital Audio Switch. Refer to the set-up information within
LBI-38938 and other referenced documents for additional information
as necessary.
3.1 STARTING THE PROGRAM
This chapter assumes that program software loading and system
hookups have been completed. The program software is installed at the
factory for new systems; however, refer to Section 2.7, SYSTEM
HOOK-UP of the previous chapter if system hookup has not been
accomplished.
3.1.1 Default User Account
From the Windows NT Program Manager open the CEC/IMC Manager
program and the CEC/IMC Manager main menu (Figure 1) will be
displayed.
The bottom status bar displays several messages that are helpful or
important to the CEC/IMC Manager user. "For Help, press F1" or the
current menu choice and the current time are displayed at each end of
the status bar. System status—"No System Errors" or "System
Errors"—and Link status—"Mom Link is Up" or "Mom Link is
Down"—provide the user with important information concerning
system operation.