Ericsson LBI-39224 - Manual (Page 208)

LBI-39224
3-178
Send Mod
Choose the Send Mod button to send the selected module
configurations (more than one module may be selected) to the
CEC/IMC MOM. This action will program the selected module.
This function can be very important during software upgrades.
Part of the upgrade procedure is to clear NOVRAM on all
boards in the CEC/IMC. This function allows you to
reprogram the LRIM after the NOVRAM has been cleared
with the configuration data stored on the CEC/IMC Manager
hard disk (See
Read Disk ).
Program LRIM
Choose the Program LRIM button to send all configured module data
for the selected LRIM to the CEC/IMC MOM. This command is
analogous to a send all (modules) command.
Close
Choose the Close button to exit the Logging Recorder Configuration
dialog box and return to CEC/IMC Manager main window. Choosing
this command does not save or send any changes made to LRIM
configuration.
3.16 EDACS DATA GATEWAY (EDG)
CONFIGURATION
Each EDACS Data Gateway (EDG) channel should be allocated a
TDM time slot. This is accomplished using a CIM designated for EDG
use. In addition, EDG configurations should be setup in accordance
with one or more of the following manuals: EDG Technical
Description (LBI-38961), EDG Installation and Maintenance (LBI
38962), EDG User's Reference Manual (LBI-38963), and EDG
Configuration Reference Manual (LBI-38964).
NOTE