Ericsson LBI-39224 - Manual (Page 243)

LBI-39224
4-5
Node ID
This field displays the current hexadecimal GSC address.
Type
This field displays the interface module type: MIM, MOM, etc.
Assignment
This field displays the setting of the interface module's Controller
Board dip switches (site assignment number).
Version
This field displays the major and minor version number of the 80C186
software installed in the interface module. Since the version number
was not coded into Controller Boards prior to version 2.00, any
previous versions (1.00 thru 1.10) of software installed will have "????"
displayed in this field.
Error(s)
This field displays the number of errors affecting the interface module
when selected. This count will include errors that affect only the
current interface module plus the number of global system errors. In
some cases the sum of all the values displayed in this field for each
individual interface module will be greater than the value displayed in
the System Errors field. This will occur whenever a global system error
currently exists, each global system error is counted as a single error in
the System Errors field and is also counted as a single error in each
individual interface module error count. As mentioned previously, this
information does not update while viewing this dialog box.
Board Identification Data
The lower half of the Board Identification dialog box contains check
boxes for the Controller Board and Audio Boards of the selected
interface module. A MIM may have a second, backup, Controller
Board, all other modules will have only one. Select a board and follow
with a
Send to cause the selected board's ID LED to begin flashing
immediately. Any board that was unselected will be sent a message
clearing its ID LED, if the ID LED was previously flashing it will now
turn off. Choose
Close to exit this dialog box and turn off all ID LEDs
on boards associated with this interface module.