Ericsson LBI-39224 - Manual (Page 145)

LBI-39224
3-115
(Console) Setup Number
This drop-down list box displays which console user setup is currently
being displayed on-screen. Select from this list box to view or
configure specific console user setup data for each console. Ten (10)
different set-ups are supported at each console.
Delete
Choose the Delete button to remove ("delete") a console user profile
database from the CEC/IMC Manager hard disk. If the console is no
longer used or the console never existed the database should be deleted.
Deleting the console user profile database also deletes the console
privilege list and C3 Modular/Desktop console configuration databases.
A Message Box will be displayed asking you to confirm (
OK ) or cancel
( Cancel ) the Delete command.
Console User Setup Profiles
All other fields in the Console User Profile Configuration dialog box
are configured specifically for each user setup. The Supervisor field is
by itself as it has special implications, the remaining fields are separated
into three (3) general groupings: Visual Indicators, Audio Indicators,
and Emergency Indicators.
Supervisor
Select this check box if the user on this shift is a supervisor. Certain
privileges are granted to supervisory consoles that are not granted to
non-supervisory consoles. When selected, two additional check box
options will appear (If Supervisor is subsequently disabled and then re-
enabled, the previous selections of the below options will be displayed):
Route Unprivileged Emergency
Select this check box to route all emergencies to the console
regardless of the privilege list entries. Unselect to route only
emergencies from entities within the console's privilege list to
the console. This field is not enabled for non-supervisor
consoles.
Monitor ICALL (Eavesdrop)
When this option enabled by selecting this check box, a
supervisory dispatcher will be able to monitor or "eavesdrop"
on Individual Calls to and from any unit which is programmed
at the C3 Maestro console. If this field is not selected
(disabled) or if the Supervisor check box is not selected, the
console will only be able to perform standard Individual Call
functions. See Table 4, Console Individual Call Levels below