Ericsson LBI-39224 - Manual (Page 55)

LBI-39224
3-25
All selected MIMs in this list will also be included in the " Save As… "
dialog box that is accessed from the Site Channel Configuration
dialog box or T1/E1 Digital Site Configuration dialog box. The
particular state is indicated by a prefix as defined in the following table.
Table 1 Configured/Active Sites Prefix Definitions
PREFIX MEANING
** The "site" has been added for
configuration but is not active and no
channel configurations have been
performed or saved.
A The control data link is active and
configuration data exists at the
CEC/IMC (default values if nothing
else) but not necessarily at the
CEC/IMC Manager.
C Channel configurations have been
performed and saved for the "site"
but the control data link is not active.
C/A Channel configurations have been
performed and saved for the "site"
and the control data link is active.
Those site-type interface modules followed by "(TEC)" are T1/E1
Interface Card equipped and are configured as described in T1/E1
Interface Card-Equipped MIM Configuration, on page 3-35.
Add
Choose the Add button to move a selected site from the Configurable
Sites list box and "add" it to the Configured/Active Sites list box, where
it can now be selected for configuration. If upon adding a site, a
configuration data file exists on the CEC/IMC Manager's hard disk
drive from a previous add and delete, the site will be added to the
Configured/Active Sites list box with its configuration data file (with a
** prefix). This previous configuration may be modified, saved, and
sent as needed.
Modify
Choose the Modify button to display the Audio Interface Type dialog
box, select either Audio Board or T1/E1 Interface Board as required by
selecting the appropriate option button. Selecting Audio Board will
activate the
Site Channel Configuration dialog box, selecting T1/E1