Ericsson LBI-39224 - Manual (Page 33)

LBI-39224
3-3
OK
Choose the OK button to save any new settings, activate those settings,
and exit the current dialog box.
Exit Program
Choose the Exit Program button to exit the CEC/IMC Manager
program and return to the Windows NT Program Manager.
3.2 USER ACCOUNT CONFIGURATION
Up to twelve (12) different user accounts can be configured for the
CEC/IMC Manager. Each user has an account which defines the user's
name, password, and access level. The default user account,
"MOMUSER," has a password of "GUEST" and a "System
Administrator" access level. For Network Manager stations the default
user account is "NMUSER" and has a password of "GUEST." This
default account is active the first time the program is executed and it
remains as one of the twelve accounts unless it is deleted. These log-in
defaults are provided in the PASSWORD.DAT file that is part of the
CEC/IMC Manager installation. To prevent unauthorized access,
deleting this default account after at least one "System Administrator"
account is configured and safeguarding the PASSWORD.DAT file by
the system administrator are recommended. This file may be used as a
backup in the event that passwords are forgotten or the installed
PASSWORD.DAT file is deleted. All user accounts are set up from the
CEC/IMC Manager Configuration menu.
In multi-user environments it is possible for two users to be
changing the same data. In these situations, the data saved,
and subsequently used to configure the CEC/IMC, will be
from the last "Save." Therefore, it is important to give
administrative privileges (access level) only to those users
authorized to make changes to the system configuration. See
also NOTE below.
IMPORTANT NOTE!