Ericsson LBI-39224 - Manual (Page 164)

LBI-39224
3-134
Figure 32 DVIM Channel Configuration List Dialog Box
Each DVIM Channel Configuration List dialog box displays the
configurable DVIMs and configured/active DVIMs. An active DVIM
represents an operating link between a DVIU and the DVIM Controller
Board.
Help
Choose the Help button to access the Help function. (Help is also
available by pressing the F1 key.)
Configurable DVIM:
The Configurable DVIM list box displays all unconfigured DVIM
interface modules. If a DVIM appears in this box, no channel
configuration exists at the CEC/IMC Manager for the corresponding
site assignment number and the DVIM may be selected for
configuration. Any number of these available DVIM may be selected at
one time.
Configured/Active DVIM:
The Configured/Active DVIM list box displays DVIMs which have
been added but not yet channel-configured, DVIMs which have had
previous channel configurations performed, and DVIMs which have
been previously channel-configured and have an active Controller
Board. Before a DVIM interface module can be channel-configured, it
must be listed in the Configured/Active DVIM list box. As with the
Configurable DVIM list, any number of the available DVIMs may be
selected at one time. All of the selected DVIMs will also be included in
the "
Save As… " dialog box that is accessed from the
DVIM Channel Configuration dialog box. See Table 1,