Ericsson LBI-39224 - Manual (Page 97)

LBI-39224
3-67
Configured/Active Sites list box will be removed and returned to the
Configurable Sites list box.
Audio Board-Equipped PIM Configuration
This section describes configurations for channels within Audio Board-
equipped site-type interface modules. All channel parameters are
configured from the
Site Channel Configuration dialog box. Only
those PIMs which were selected in the
Site Channel Configuration List dialog box are available for channel
configuration. Select the desired PIMs to configure from the
Configured/Active Sites list, or add the desired PIMs from the
Configurable Sites list, if not already listed, as described earlier.
Choose
Modify to display the Audio Interface Type dialog box, select
the Audio Board option button, then choose OK to display the
Site Channel Configuration dialog box. The selected PIMs are
displayed in a list box at the top center of the dialog box.
Help
Choose the Help button to access the Help function. (Help is also
available by pressing the F1 key.)
View Current CEC/IMC Manager Channel Configuration
The upper list box in the
Site Channel Configuration dialog box,
labeled "CEC/IMC Manager," displays the current channel
configurations stored on the CEC/IMC Manager hard disk for the
currently selected PIM. As the edit fields above this list box are
modified for a selected channel, the changes will appear also in this list
box for the selected channel.