Ericsson LBI-39224 - Manual (Page 227)

LBI-39224
3-197
Choose the Apply Grp/Site Filter button to initiate the specified
search parameters. Choose the Send Location Request button to
execute the specified search. The Group Locations (units located) will
be displayed in the list box.
3.20.4 Multisite Settings
Multisite options Timer Master Enable/Disable, Multisite Monitor, and
Multisite Logout Polling are selected from the
System Options dialog
box; each of these options are discussed in the following paragraphs.
From the CEC/IMC Manager menu bar select
Configure System /
System Options / Multisite Settings to display the System Options
dialog box.
Help
Choose the Help button to access the Help function. (Help is also
available by pressing the F1 key.)
Save and Send
Choose the Save and Send button to save the new Multisite
configuration to the CEC/IMC Manger hard disk drive and to send the
new configuration to the CEC/IMC. Verification messages are
displayed at the CEC/IMC Manager when the new configuration is
saved to disk and when the CEC/IMC receives the Multisite
configuration.