Ericsson LBI-39224 - Manual (Page 254)

LBI-39224
4-16
GSC Data
This option is also accessible from the Diagnostics Options menu. It
allows the user to view the CEC/IMC Manager datalog information in a
raw hexadecimal format. A typical GSC Data screen is shown below.
Figure 51 Diagnostics Dialog Box, GSC Data Option Selected
Once displayed, this information can also be sent to a file or printed.
This on-line option is similar to the off-line GSCMOM.EXE program
described in Chapter 5 of this manual.
The buffer at the MOM controller will wait until it is about
65% full before writing to the data log file. This could mean a
delay of up to 5 minutes between keying a call and the call
showing up in the data log.
To create a GSC Data report select the GSC Data option button and
enter date and time ranges in the appropriate text box, then choose the
Display button to display the datalog file. Since the datalog file may
be quite large, it could take several minutes to finish a translation. The
GSC Data information can be sent to a file or to a printer by choosing
the
Save To File or Print buttons respectively.
NOTE