Ericsson LBI-39224 - Manual (Page 138)

LBI-39224
3-108
CIM Audio Board Channel Configuration
All channel parameters are configured from the
Console Channel Configuration dialog box, Figure 26. Only those
consoles which were selected in the
Console Channel Configuration List dialog box are available for
channel configuration. Select the desired console interface modules to
configure from the Configured/Active Consoles list, or add the desired
modules from the Configurable Consoles list, if not already listed.
Choose
Modify to display the Console Channel Configuration
dialog box.
Figure 26 Console Channel Configuration Dialog Box
Help
Choose the Help button to access the Help function. (Help is also
available by pressing the F1 key.)
View Current CEC/IMC Manager Channel Configuration
The upper list box in the
Console Channel Configuration dialog box,
labeled "CEC/IMC Manager," displays the current channel
configurations stored on the CEC/IMC Manager hard disk for the
currently selected console interface module. As the edit fields above
this list box are modified for a selected channel, the changes will appear
also in this list box for the selected channel.
View Current CEC/IMC Channel Configuration
The lower list box in the
Console Channel Configuration dialog box,
labeled "CEC/IMC," displays the current channel configurations stored