Ericsson LBI-39224 - Manual (Page 27)

LBI-39224
2-5
7. The TDM Bus/Slots must be read from the CEC/IMC in the
Console Audio Configuration screens.
a) Select Menu Option Configure System / CEC/IMC
Configuration / CIM.
b) Select ALL consoles that are displayed in the
Configured/Active Consoles list box.
c) Choose the Modify button.
d) For each console push the CEC/IMC to Disk button.
e) Verify the Slots match in the Upper and Lower list boxes
for ALL channels.
8. The TDM Bus/Slots must be read from the CEC/IMC in the
CTIM Audio Configuration screens.
a) Select menu option Configure System / CEC/IMC
Configuration / CTIM.
b) Select ALL CTIMs that are displayed in the
Configured/Active Sites list box.
c) Choose the Modify button.
d) For each CTIM push the CEC/IMC to Disk button.
e) Verify the Slots match in the Upper and Lower list boxes
for ALL channels.
9. The TDM Bus/Slots must be read from the CEC/IMC in the
Site Audio Configuration screens.
a) Select menu option Configure System / CEC/IMC
Configuration / MIM.
b) Select ALL sites that are displayed in the
Configured/Active Sites list box.
c) Choose the Modify button.
d) For each site choose the CEC/IMC to Disk button.
e) Verify the Slots match in the Upper and Lower list boxes
for ALL channels.
10. The TDM Bus/Slots must be read from the CEC/IMC in the
PIM Audio Configuration screens.
a) Select menu option Configure System / CEC/IMC
Configuration / PIM.
b) Select ALL PIMs that are displayed in the
Configured/Active Sites list box.