Ericsson LBI-39224 - Manual (Page 236)

LBI-39224
3-206
Read Disk
Choose the Read Disk button to read the currently selected site's
ProSound configuration from the CEC/IMC Manager's hard disk drive.
This configuration may not be the same as the configuration at the
CEC/IMC. A
Read Disk followed by a Send will update the
CEC/IMC configuration to match the CEC/IMC Manager
configuration.
Read CEC/IMC
Choose the Read CEC/IMC button to read the currently selected site's
ProSound configuration at the CEC/IMC. This is the actual
configuration for the currently selected site. A
Read CEC/IMC
followed by a Save will update the CEC/IMC Manager hard disk
configuration to match the CEC/IMC configuration.
Adjacencies (read only)
During wide area scan operations up to six possible adjacent sites can
be scanned. This field displays the six adjacency site sequence
numbers for the currently selected site.
Site ID (read/write)
This field defines the site ID numbers of the six possible adjacent sites,
enter the adjacent site ID number. Leave the field set to "0" (default) if
no adjacent site is present or if ProSound operation is not required at
this site.
CEC/IMC ID (read/write)
This field defines the switch assignment numbers for the six possible
adjacent sites. In each row enter the CEC/IMC switch assignment
number ("node ID") for the adjacent site.
Control Channel (read only)
This field displays the control channels currently in use for each of the
six possible adjacent sites. A "0" is displayed if the adjacent site has
not been configured for ProSound operation.
Save and Send ProSound Configurations
Any new ProSound configuration must be sent to the CEC/IMC before
it can take effect, also any new configuration sent to the CEC/IMC
should be saved to the CEC/IMC Manager hard disk. This ensures that
the current CEC/IMC configuration matches that stored on the
CEC/IMC Manager hard disk. Like other configurations, the ProSound