Ericsson LBI-39224 - Manual (Page 63)

LBI-39224
3-33
the selected channel by entering "YES" in the ALC text box or disable
it by entering "NO."
Save and Send MIM Audio Board Configurations
When channel configuration of the selected interface module is
complete, the
Site Channel Configuration dialog box changes must be
sent to the CEC/IMC before the changes will take effect. This
reprograms the MIM Controller Boards. However, it is important to
save the new configuration prior to sending it to the CEC/IMC because
a send will send the last configuration that was saved to disk; saving
first ensures that the actual CEC/IMC channel configuration will be the
same as the channel configuration stored on the CEC/IMC Manager
hard disk. To save and send configurations, action is required first in
the
Site Channel Configuration dialog box and then in the
Site Channel Configuration List dialog box.
Site Channel Configuration dialog box
Save
Choose the Save button to perform an immediate save of the currently
selected site-type interface module's channel configuration. Other
"sites" displayed in the list box located at the top of the dialog box are
not saved. This channel configuration is saved on the CEC/IMC
Manager's hard disk drive. Any previous channel configuration for the
"site," if present, is erased and replaced with the current channel
configuration. If the CEC/IMC Manager is running remotely or as a
part of the EDACS Network Manager, this configuration is saved on the
CEC/IMC Manager server, typically local to the CEC/IMC; it is not
saved at the remote location.
Save As...
Choose the Save As… button to allow the currently selected site-type
interface module channel configurations to be saved as a different site-
type interface module. It is provided to speed configurations when
similar MIM configurations are required. Upon choosing
Save As… a
small dialog box, Figure 17, will appear which allows entry of a new
MIM number. Select the desired MIM number from one of the choices
in the drop-down list box, the choices listed are the selected MIMs in
the Configured/Active Sites list box. Like
Save , Save As… stores
channel configuration on the CEC/IMC Manager server.