Ericsson LBI-39224 - Manual (Page 158)

LBI-39224
3-128
box, the selected module and its parameters will be displayed in the text
boxes above this list box. Change any or all of the parameters as
required.
Module Type
The Module Type may be either TRUNKED or CONVENTIONAL.
TRUNKED means that a trunked unit or group may be programmed
into that module. CONVENTIONAL means that a conventional
channel may be programmed into that module. Press the Enter (or
Tab) key once to highlight the Module text box (read only), press the
Enter (or Tab) key again to highlight the Module Type text box. Enter
(type) "c" for CONVENTIONAL or "t" for TRUNKED and press
Enter (or Tab) to complete the entry and move to (highlight) the
Module Display Type text box.
All of the text boxes can be selected using the selection cursor,
however, use of the Enter or Tab keys may be faster and more
convenient.
Module Display Type
The Module Display Type may be either ALPHANUMERIC (ALPHA)
or FIXED. ALPHA means that the module has an alphanumeric
programmable display. FIXED means that the module has a fixed
display (non-programmable). Press the Enter (or Tab) key three times
if Module Type was not edited or press Enter (or Tab) once from the
Module Type text box to highlight the Module Display Type text box.
Enter (type) "a" for ALPHANUMERIC (ALPHA) or "f" for FIXED
and press Enter (or Tab) to complete the entry and move to (highlight)
the Number of Unselect Speaker text box.
Number of Unselect Speaker
The unselect speaker is the speaker for the non-selected modules. Most
consoles have 4 speakers with speaker 1 is reserved as the Select
speaker, select between speakers 2 - 4 as the Unselect speaker by
pressing the Enter (or Tab) key until this text box is highlighted. Enter
the number of the unselect speaker (2 - 4) and press Enter (or Tab) to
move to the Module Present text box.
NOTE