Ericsson LBI-39224 - Manual (Page 290)

LBI-39224
B-2
LOGGED
WARNING
MESSAGE
LOGGED
WARNING
DATA
CAUSE/
CORRECTIVE
ACTION
W02-050:
OUT OF RANGE -
AUDIO SUM COUNT Value of sum count
when the attempt was
made to add another
channel. Current summed audio list has the
maximum number of
channels allowed and an attempt
was made to add an additional
channel.
W02-051:
OUT OF RANGE -
CONSOLE LOG
COUNT Value of console log
count that generated
the warning. Current number of console
originated calls greater than
maximum number of consoles
allowed.
W02-052:
OUT OF RANGE -
MODULE COUNT Value of console
module count when
the attempt was made
to add another
module. Console module count currently at
maximum and an attempt was
made to add another module.
W02-115:
OUT OF RANGE -
PATCH/SIMUL Value of entry count
when the attempt was
made to add another
entry. An attempt was made to add
another entry (create a
patch/simulselect), but the MOM
Controller Board patch/simulselect
table already contains the
maximum number of entries.
W02-121:
OUT OF RANGE -
UNIT ID Unit ID that generated
the warning. Unit ID found that was greater than
maximum allowed.
W02-122:
OUT OF RANGE -
GROUP ID Group ID that
generated the
warning. Group ID found that was greater
than maximum allowed.
W02-131 & W02-132:
OUT OF RANGE -
DEVICE TYPE/
ASSIGNMENT Bad device or
assignment (usually
FFh). A Controller Board has an invalid
device type or assignment DIP
switch setting. Corrective action:
Check the board's DIP switches.
W03-064:
UNSUPPORTED ID -
CONSOLE ICOM REQ Message ID value that
generated the
warning. Unsupported message ID from a
CIM.
W03-065:
UNSUPPORTED ID -
MODULE PROGRAM
REQUEST Message ID value that
generated the
warning. Unsupported message ID from a
CIM or LRIM.