ARM Electronics CMS - Manual (Page 102)

User’s Manual
101
7.19 E-MAP Function
E-MAP is a function that allows users to illustrate the positions of the cameras
on a self-selected image. Click on the <Emap> icon to open E-MAP window.
Please follow the steps below to setup the E-MAP.
Step 1.
First load an image file by clicking on <Load Image> icon.
NOTE: The image shown in the window is the default picture. It
will only be available when default is installed.
Step 2.
The figure below is the Load Image window to add or delete images,
and undo or confirm settings. Click on <Add> to add an image. Note
that E-MAP only supports *.bmp, *.jpg, and *.gif files.