ARM Electronics CMS - Manual (Page 8)

User’s Manual
7
Step 3.
The CMS main program will be the first program to be installed.
Choose a folder to install the CMS or it will be installed to a default
destination folder “\CMS\”. Click <Install> to start the Installation; or
click <Back> to go back to the previous step.
Step 4.
The NTP Server will be the next program to be installed. The NTP
Server enables the local computer, which is running the CMS, to
become a central NTP Server for the connected DVR(s) so the time
for the local computer and the connected DVR(s) is synchronized.
When the confirmation window popup, click <OK> to start installing
the NTP Server.
Step 5.
When the Software Installation is completed, click <Close> to exit.
NTP Service (Server)
The NTP Service (Server) enables the local computer, which is running the
CMS, to become a central NTP server for the connected DVR(s) so the time
for the connected DVR(s) and the local computer is synchronized.
To do so, the IP address of the local computer is needed.
Go to Start menu, select Run.
Type in cmd and click OK.