ARM Electronics CMS - Manual (Page 7)

User’s Manual
6
NOTE:
After clicking <OK>, an un-installation confirmation
dialog will be displayed. Click <Uninstall> to uninstall the older
version and continue with the next step.
Step 2.
Select the components that are going to be installed. It is strongly
recommended to select the <Start Menu Shortcuts> to create
shortcuts in the Start Menu and on the Desktop. Otherwise whenever
the program is to be opened, it will have to be found under the path:
“\CMS\EXE\CMS.exe”. Click <Next> to go to next step.
The components of the CMS Installation Setup are:
a. Microsoft VC 2008 SP1 Redistributable Package: This is an
upgrade package required for correctly running CMS.
b. CMS 3.18.0 (Required): The CMS main program must be installed
(default).
c. Start Menu Shortcuts: Check the box to create shortcuts in the
Start Menu and on the Desktop.
d. NTP (Network Time Protocol) Server: Check the box to install the
NTP server.
e. Default Setting (Old setting will be deleted!): Check the box to load
default setting, or uncheck it to load the old setting of previous
installed CMS.
f. Ext2Fsd (ext2 file system driver for Windows): Check the box to
install driver in order to be able to read raw files in DVR HDD.
NOTE:
If users have already installed the EXT2IFS driver
and software, please uninstall it beforehand, for there might
be confliction occurs while installing Ext2Fsd driver during
CMS installation.