ARM Electronics CMS - Manual (Page 9)

User’s Manual
8
Type in ipconfig to get the IP Address of the local computer. Write down the
IP address on a piece of paper for later use.
After the IP address is found, setup the connected DVR(s).
First, go to <Main Menu> Æ <System Setup> Æ <Date/Time> Æ <Time
Zone> to setup time zone. To find out the local time zone, please visit
www.greenwichmeantime.com
NOTE
: The <Time Zone> must be set or the <Network Time Protocol
Setup> will not be accessible.
After entered the local time zone, the <Network Time Protocol Setup> option
will be accessible. Go to <Main Menu> Æ <System Setup> Æ <Date/Time>
Æ
<Network Time Protocol Setup>, and the following menu will be displayed.
Network Time Protocol Setup
NTP Server
Automatically Time Sync
Manually Time Sync time.nist.gov
On
No
In this example, the NTP server should be set to “192.168.7.122” which is the
IP address of the local computer. After the NTP server is set, select <Yes> for
<Manually Time Sync> to immediately sync the time with the local computer.
The time sync can also be updated periodically. Select <On> for
<Automatically Time Sync> and the time will be automatically synced once an
hour.