ARM Electronics CMS - Manual (Page 49)

User’s Manual
48
6.7 Login Setting
Users can edit options regarding login settings in this section. Administrator
username and password is required to edit the setting.
As shown in the above picture, the box marked “1” is where users can enter a
set of username and password to be used for auto login. The “Verify” button
can help users to check if username and password are correct. The following
messages boxes will popup to inform the result of verification.
The box marked “2” contains the options regarding automatic actions.
Clicking the first option “Start CMS when Windows starts up” to request the
computer to open CMS in the mean time when the system startup. Note that
the other two options “Auto Login” and “Auto retrieve Live image When Login”
will be checked at the same time. Nonetheless, it is still users’ choice to
determine the favorite setting.
A message box will be shown when CMS is auto opening after the system
started up. Click “Cancel” can terminate opening CMS.