ARM Electronics CMS - Manual (Page 29)

User’s Manual
28
6.2.3 Setup the DVR Site Manually
If the detailed information (IP address, port, username, and password) of the
connected DVR is provided, a site can be setup manually.
Add a new site and enter the Site name, IP address, Port, Username, and
Password. Select <DVR> and click <Save> to complete the setting.
NOTE: If the entered Username and Password is a user account
instead of an administrator account, the same DVR account restriction
will be applied. When a user account accessed a function that is
restricted, a warning message will be displayed.