ARM Electronics CMS - Manual (Page 32)

User’s Manual
31
Advance Streaming Setting
Users can also manually setup dual streaming function via clicking on
<Advance Streaming Setting>. If users wish to connect to the IP Camera’s
webpage via a browser, click <Link to WebPage> at the bottom.
NOTE:
Auto-Streaming Configuration has to be disabled in order to be
able to setup <Advance Streaming Setting>.
Step 1.
Check the box in front of <Enable> under Sub Stream section to
enable dual streaming. Otherwise, uncheck to disable dual streaming
function.
Step 2.
Select preferred stream type and resolution for both the main stream
and the sub stream.
Step 3.
Check the box in front of <Record> under Main Stream section OR
Sub Stream section to select the recording format at CMS site.
Step 4. Click on <OK> to confirm and save the setting. A popup window will
be displayed to notify users that the setting is changed. Clicking on
<Apply> will allow users to check the effect of the setting via the live
display window immediately.
NOTE:
If sub stream is not enabled, users will not be able to change
dual streaming options during Live display at the main window. It will
be preset as <Display: Main Stream>.