H3C Technologies H3C Intelligent Management Center - Manual (Page 118)

109
Figure 42 Configuring the NQA type
4. Create the NQA instance:
a. Click the Service tab.
b. From the left navigation tree, click Service Health Manager > NQA Instance.
c. Click Add Group.
The page for adding an NQA group appears.
d. Enter 001 in the NQA Group Name field.
Use the default settings for other parameters.
e. Click OK.
The NQA Groups page appears.
f. Click Add Instance.
The page for adding an NQA instance appears.
Figure 43 Configuring basic parameters for the NQA instance