H3C Technologies H3C Intelligent Management Center - Manual (Page 41)

32
{
NQA Instance Collection Period—Specify the period for collecting NQA instance statistics:
− Collection Date—Select the date to collect NQA instance statistics per week.
− Collection Time—Select the start time and end time to collect NQA instance statistics per
day.
− Collection Period (mins)—Select the interval to collect NQA instance statistics.
{
Alarm Policy—Select the alarm policy of the NQA instance. Select one of the following
options:
− Never (No Alarm)—Alarms are never triggered.
− Immediately (Triggers Alarm At Once)—An alarm is immediately triggered when a
threshold violation occur.
− Consecutive (X Consecutive Threshold Violations Trigger Alarm)—An alarm is triggered
when the number of the consecutive threshold violations reaches X. The value range is 1 to
5.
− X of Y (X Threshold Violations in Recent Y times Trigger Alarm)—An alarm is triggered
when the number of the consecutive threshold violations reaches X out of the recent Y
operations. The value ranges for X and Y are both 1 to 5.
− Average (Average Value in the Recent X Times violates the Threshold and Triggers
Alarm)—An alarm is triggered when the average threshold of each X operations reaches
the threshold. The value range is 1 to 5.
9. Click Finish.
The newly added NQA instance is displayed in the NQA instance list.
Copying an NQA instance
1. Access the NQA instance list page.
2. In the Operation column, click the Copy icon for the NQA instance you want to copy.
3. Configure the parameters for the NQA instance. For more information, see "Adding an NQA
instance."
Compared with the name of the copied instance, the default name of the new NQA instance is
marked with Copy name.
Starting or stopping an NQA instance
After you add an NQA instance, the Task Status column on the NQA instance list page displays the
NQA instance status according to the execution start and end time.
• The icon indicates that the NQA instance has stopped.
• The icon indicates that the NQA instance is running.
You can also manually start or stop the NQA instance as follows:
• Click Stop to start the NQA instance.
• Click Start to stop the NQA instance.
Modifying an NQA instance
You cannot modify a running NQA instance.
To modify an NQA instance:
1. Access the NQA instance list page.