H3C Technologies H3C Intelligent Management Center User Manual
Page 96
Advertising
87
f.
Click OK.
Figure 24 Configuring the NQA type
4.
Create the NQA instance:
a.
Click the Service tab.
b.
From the left navigation tree, click Service Health Manager > NQA Instance.
c.
Click Add Group.
d.
On the page that appears, enter 111 in the NQA Group Name field.
Use the default settings for other parameters.
e.
Click OK.
The NQA Groups page appears.
f.
Click Add Instance.
The page for adding an NQA instance appears.
Figure 25 Configuring basic parameters for the NQA instance
5.
Configure basic parameters for the NQA instance:
a.
NQA Instance Name—Enter VPN link (Gateway to Router).
b.
Group—Select 111.
Advertising