H3C Technologies H3C Intelligent Management Center User Manual
Page 128
Advertising
119
Figure 50 Configuring the NQA type
4.
Create the NQA instance:
a.
Click the Service tab.
b.
From the left navigation tree, click Service Health Manager > NQA Instance.
c.
Click Add Group.
d.
On the page that appears, enter 001 in the NQA Group Name field.
Use the default settings for other parameters.
e.
Click OK.
The NQA Groups page appears.
f.
Click Add Instance.
The page for adding an NQA instance appears.
Figure 51 Configuring basic parameters for the NQA instance
5.
Configure basic parameters for the NQA instance:
a.
NQA Instance Name—Enter Link 1 (Core Router to Switch A).
b.
Group—Select 001.
Advertising