HEIDENHAIN TNC 360 ISO Programming - Manual (Page 227)

TNC 360 11-28
11 Tables, Overviews, Diagrams
Miscellaneous Functions (M Functions)
Miscellaneous functions with predetermined effect
M
M00
M02
M03
M04
M05
M06
M08
M09
M13
M14
M30
M89
M90
M91
M92
M93
M94
M95
M96
M97
M98
M99
Function
Stop program run / Spindle stop / Coolant off
Stop program run / Spindle stop / Coolant off. Clear the status display (de-
pending on machine parameter) / Return to block 1
Spindle on clockwise
Spindle on counterclockwise
Spindle stop
Tool change / Stop program run (depending on machine parameter) / Spindle
stop
Coolant on
Coolant off
Spindle on clockwise / Coolant on
Spindle on counterclockwise / Coolant on
Same function as M02
Vacant miscellaneous function
or
Cycle call, modally effective (depending on machine parameter)
Smoothing corners
Within the positioning block:
Coordinates are referenced to the machine datum
Within the positioning block:
Coordinates are referenced to a position defined by the
machine tool builder (such as a tool change position)
Within the positioning block:
Coordinates are referenced to the current tool position.
Effective in blocks with R0, R+, R–
Limit display of rotary axis to value under 360°
Reserved
Reserved
Machine small contour steps
Completely machine open contours
Blockwise cycle call
Effective at
start of end of
block block
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•