HEIDENHAIN TNC 360 ISO Programming - Manual (Page 9)

TNC 360
2 Manual Operation and Setup
2.1 Moving the Machine Axes ................................................................... 2-2
Traversing with the machine axis direction buttons .................................................... 2-2
Traversing with the electronic handwheel .................................................................. 2-3
Working with the HR 330 Electronic Handwheel ........................................................ 2-3
Incremental jog positioning ......................................................................................... 2-4
Positioning with manual data input (MDI) ................................................................... 2-4
2.2 Spindle Speed S, Feed Rate F and Miscellaneous Function M ........ 2-5
To enter the spindle speed S ...................................................................................... 2-5
To enter the miscellaneous function M ....................................................................... 2-6
To change the spindle speed S ................................................................................... 2-6
To change the feed rate F ........................................................................................... 2-6
2.3 Setting the Datum without a 3D Touch Probe .................................. 2-7
Setting the datum in the tool axis ............................................................................... 2-7
Setting the datum in the working plane ...................................................................... 2-8
2.4 3D Touch Probe System ...................................................................... 2-9
3D Touch probe applications ....................................................................................... 2-9
Selecting the touch probe menu ................................................................................. 2-9
Calibrating the 3D touch probe .................................................................................. 2-10
Compensating workpiece misalignment ................................................................... 2-12
2.5 Setting the Datum with the 3D Touch Probe System .................... 2-14
Setting the datum in a specific axis .......................................................................... 2-14
Corner as datum ........................................................................................................ 2-15
Circle center as datum .............................................................................................. 2-17
2.6 Measuring with the 3D Touch Probe System .................................. 2-19
Finding the coordinate of a position on an aligned workpiece .................................. 2-19
Finding the coordinates of a corner in the working plane ......................................... 2-19
Measuring workpiece dimensions ............................................................................ 2-20
Measuring angles ...................................................................................................... 2-21