Solare Datensysteme Solar-Log User Manual
Page 164
164
Direct Device Configurations (Solar-Log 500)
25�3 Defining system settings
Under System settings the following settings are made:
•
Language
•
Country
•
Date and time
•
Large External Display
•
Firmware
25�3�1 System | Language
The display language for the Solar-Log™ can be set in this menu. The selected display language applies
both to the display and the web browser.
•
Select
System | Language
from the menu
•
Select the desired display language from the list
•
Press
ENTER
to save.
25�3�2 System | Country
The country setting affects how the date, time and currency formats are displayed.
•
Select
System | Country
from the menu
•
Select the desired country from the list
•
Press
ENTER
to save.
25�3�3 System | Date/Time
The clock time is factory-set, but it may be lost due to long periods of storage.
The time zone, date and summertime values must be set correctly, so that no incorrect statuses or results
are obtained during monitoring and graph display, e.g. when e-mail messages are sent or when a curve is
displayed on the day graph.
Any incorrect settings can be corrected in the
System | Date/Time
submenu.
Correcting the time zone
•
Select
System | Date/Time | Time zone
from the menu.
•
Enter the time difference in hours (Default: GMT +1).
•
Press
ENTER
to save.
Correcting the date
•
Select
System | Date/Time | Date
from the menu.
•
Correcting the date
•
Press
ENTER
to save.
Correcting the time
•
Select
System | Date/Time | Time
from the menu.
•
Correcting the time
•
Press
ENTER
to save.