Settings for analog modem, Settings for gprs modem – Solare Datensysteme Solar-Log User Manual

Page 177

Advertising
background image

177

Direct Device Configurations (Solar-Log 1000)

Alternate DNS server

In some networks, the DNS server is a separate address for resolving Internet addresses, and is not the

same as the Internet router (gateway).

In this case, tick the check box and enter the IP address of the DNS server.

Settings for analog modem

If Internet access by analog modem has been selected, the access data of the telephone service provider

must be entered here.

Note

Since the cost of analog Internet access has risen drastically in recent years, we recom-

mend checking if it might be more cost effective to use a mobile service provider for the

data transmission.

Settings for GPRS modem

In many cases where no DSL or telephone connection is available, a mobile phone connection to the Inter-

net is the only option for sending e-mails, text messages (SMS) and data over the Internet to the home-

page.

All of the data for the German networks is pre-configured. These pre-configurations are available when

configuring via a web browser. When configuring via the display of the Solar-Log 1000, this data has be

entered manually.

Enter the following configuration information here; this information can be obtained from your mobile

service provider:

APN

APN (Access Point Name) of the mobile service provider

Users

User name for your mobile phone account

Password

Password for the mobile phone account

SIM PIN code

PIN number of the SIM card

Procedure

Enter

All of the Data

The mobile service provider recommends leaving the user name and password empty; however,
sometimes it is necessary to type in some text in order to establish the data connection success-
fully.

Touch

Save

and then Next to go to the next dialog.

Setting options and testing the GPRS modem connection

Advertising