28�1 led status indications – Solare Datensysteme Solar-Log User Manual
Page 199
199
Notifications by LED (Solar-Log 200, 500 and 1000)
28 Notifications by LED (Solar-Log 200, 500
and 1000)
28�1 LED status indications
On the front of the unit at the bottom left are four LEDs that show the operating status of the unit.
Fig.: Status LEDs
Depending on the operating status, LED 1, LED 2 and LED E may flash quickly or slowly, and may be lit
steadily or switched off.
The red LED P indicates the presence of the power supply.
LED E is not lit during normal fault-free operation. If lit or flashing, it indicates that a malfunction has oc-
curred.
Normal operation
LED 1
LED 2
LED E
LED P
Meaning
quickly
quickly
off
Max. 5 min.: Device starts
lit
slow
off
The time is synchronized via the
Internet.
off
quickly
off
The configuration is being im-
ported from the inverters.
lit
lit
off
Normal operation, inverter online
lit
off
off
Normal operation, inverter offline