Solare Datensysteme Solar-Log - Manual (Page 205)

205
Faults
29�2�2 Fault messages time
These fault messages are displayed on the LCD display
Fault messages
Time
Error code Message Possible cause or remedy
1 No time/date set Set the time and date or use the automatic time
synchronization function
TM Just like error 1
The names have been changed with Firmware
3.0.2.
29�2�3 Fault messages WiFi
These fault messages are shown in the LCD display and also in the Status box under Configuration | Net-
work | WiFi .
Fault messages WiFi
Error code Message Possible cause/remedy
10 Initialization error
11 Incorrect WiFi configura-
tion Please check if all of the required param-
eters were configured.
12 Error while initializing the
wireless LAN module Potential hardware failure. Contact tech-
nical support
20 Error while connecting The signal is too weak. Other network
signals are interfering with the connec-
tion.
21 No access point found The access point is turned off or not
available. The SSID was entered incor-
rectly.
30 Authentication failure The network key entered is incorrect.
The encryption type entered is wrong.
99 Unknown error An unexpected error occurred. If this
error continues to occur, contact our
technical support.