Solare Datensysteme Solar-Log - Manual (Page 43)

43
Connecting the inverters
11�1 Switch off the inverters and Solar-Log™�
Switching inverters off
Before a making a cable connection between the Solar-Log™ and the connections inside the inverter and
before installing an interface card in the inverter, always turn off all of the inverters first.
To do this, read the manufacturer's documentation for the inverter, and proceed as follows:
•
Disconnect the AC side
•
Disconnect the DC side
•
Wait at least 5 minutes until the condensers in the inverters have discharged.
Switching the Solar-Log™ off
 Unplug the power socket connection