Solare Datensysteme Solar-Log - Manual (Page 69)

69
Installation
14�3�1 Carrying out the initial set up of the Solar-Log 1200
The initial configuration of Solar-Log 1200 is made via a Web browser.
Procedure:
•
Enter the address http://solar-log in the address bar of the web browser.
•
A selection of display languages is displayed.
•
Select the desired Display Language .
•
The welcome screen then appears.
•
In the navigation bar at the top, click on Configuration
•
The following menus have to be configured:
Internet (Chapter “17 Internet Configuration”)
Network (Chapter “16.1 Configuring network settings”)
Device (Chapter “18 Configuring connected devices”)
Plant (Chapter “19 Configuring Plant Data”) and
System (Chapter “22 System Configuration”).
14�4 Initial installation Solar-Log 1000 and 2000
The initial configuration of Solar-Log 1200 is made via a Web browser. All of the device connections need to
be established and it is best to connect the Solar-Log 2000 to an Internet router.
All settings made at the initial startup can be changed at a later time.
14�4�1 Carrying out the initial set up of the Solar-Log 2000
The initial configuration of Solar-Log 2000 is made via a Web browser.
Procedure:
•
Enter the address http://solar-log in the address bar of the web browser.
•
A selection of display languages is displayed.
•
Select the desired Display Language .
•
The welcome screen then appears.
•
In the navigation bar at the top, click on Configuration
•
The following menus have to be configured:
Internet (Chapter “17 Internet Configuration”)
Network (Chapter “16.1 Configuring network settings”)
Device (Chapter “18 Configuring connected devices”)
Plant (Chapter “19 Configuring Plant Data”) and
System (Chapter “22 System Configuration”).